lrhodes.com

Top Resource For On & Off Road Bikes & Vehicles For Sale

Breather Bracket Hardware

without comments

Shopping Results for: Breather Bracket Hardware




No items matching your keywords were found.
Harley Sportster 883 XL 1988-2006 Chrome Air Cleaner Bracket for CV Carb Harley Sportster 883 XL 1988-2006 Chrome Air Cleaner Bracket for CV Carb
List Price: $24.95
Sale Price: $32.99

Chrome air cleaner brace provides additional support for the Dragtronâ"¢ II air cleaners or any flat-backed air cleaners

Elite Engineering Standard PCV Oil Catch Can & Hardware with Black AN Fittings for 2010+ Camaro LS3 (SS) and Z28 - BLACK Elite Engineering Standard PCV Oil Catch Can & Hardware with Black AN Fittings for 2010+ Camaro LS3 (SS) and Z28 - BLACK
List Price: $185.95
Sale Price: $185.95

Elite Engineering's PCV Oil Catch Can has a unique 3-chamber design to effectively separate oil from the crankcase vapors, thereby eliminating all negative effects of excessive intake system oil contamination. Oil vapor from the crankcase enters the first inlet/filtration chamber where it is slowed down and caught in the stainless-steel mesh; it then moves onto the second transition/diffusion chamber. The diffusion chamber has a very specific set of holes to remove the oil and only let clean air vapor pass. Lastly, the vapor passes into the third exit chamber before it exits the catch can. Not all Catch Cans are created equally! Often imitated, never duplicated. Most Catch Cans on the market are just comprised of an empty container with 2 ports. While that simple design may trap a few oil droplets, our Catch Can is designed to condense the oil vapor and trap the oil inside the container. Our test-proven design incorporates a stainless-steel mesh and screening mechanism that acts like a maze to collect and condense the oil vapor. Once the oil vapors condense into liquid droplets, it falls to the bottom of the can. In addition, the top assembly is specially designed to keep any liquid from climbing out the exit hole during aggressive driving conditions. Stored oil volume is approximately 8 ounces. You will be amazed by how much oil our Catch Can will catch! Don't settle for an inferior competitor's product. Insist on Elite Engineering's Catch Can! In keeping with our high-quality standards, all supplied mounting hardware and screws are stainless steel. The supplied custom machined mounting bracket is black anodized 6061-T6 aluminum, and is attached to your specific vehicle with the hardware supplied. Each Catch Can kit includes everything you need to install the system. Basic mechanical skills and common hand tools are the only things required.

Arlen Ness 18-326 Black Big Sucker Stage I Air Filter Kit with Cover Arlen Ness 18-326 Black Big Sucker Stage I Air Filter Kit with Cover
List Price: $143.95
Sale Price: Too low to display

Features a one-piece aluminum backing plate/CARB support bracket with patented hidden breather technology and radius air inlet eliminates the need for Banjo fittings, hoses and filter breather passages exit at the mouth of the carburetor/throttle body, creating a virtually closed-loop system.

Elesa 49411 Side Mount for Threaded Cap, Matte Black Technopolymer, NBR Synthetic Rubber Packing Ring, Six Zinc-Plated Steel Self-Tapping Screws, 4.61 Elesa 49411 Side Mount for Threaded Cap, Matte Black Technopolymer, NBR Synthetic Rubber Packing Ring, Six Zinc-Plated Steel Self-Tapping Screws, 4.61" x 5.85"
List Price: $57.52
Sale Price: $57.52

The breather cap to be coupled to the flange is not included in the supply and has to be ordered separately. Depending on the customer's requirements, can be used breather caps type SFN.,SFP.,SFW. Mount: polyamide based (PA) technopolymer with NBR synthetic rubber packing ring; Flange: glass-fiber reinforced polyamide based (PA) technopolymer, threaded connector with flat gasket in cork impregnated MGS based rubber; Basket: polypropylene based (PP) technopolymer. Flange and basket are fitted to the mount by means of six zinc-plated steel self-tapping screws TC-N10 (Ø 4.8x19) UNI 6951-DIN 7971, supplied. The mount is fitted to the reservoir by means of seven M6 screws and relative washers (not supplied). Maximum recommended tightening torque: 8 Nm.

J&TOP Four Adjustable Angles Playstand with Vent Hole for Nintendo Switch J&TOP Four Adjustable Angles Playstand with Vent Hole for Nintendo Switch
Sale Price: $9.99

Unique designed play stand for Nintendo Switch Contain: 1X Nintendo Switch Compact Playstand 1X English Manual

Rough Country - 70903 - 2-inch Chrome Series CREE LED Square Lights (Pair) Rough Country - 70903 - 2-inch Chrome Series CREE LED Square Lights (Pair)
List Price: $79.95
Sale Price: $79.95

Description:Stay out later on the trails with Rough Country's affordable set of 2-inch Square CREE LED Lights. This all-inclusive kit features everything you need to get going while the compact size makes it perfect for adorning a bumper, hood, roof, or anywhere you can imagine. See the trails with these 18-watt, and 1440-lumens, LED lights. These all-weather lights feature a durable, die-cast aluminum housing and include a wiring harness and an attached low-profile mounting bracket!Rough Country's 2-inch Chrome Series CREE LED Square Lights (Pair) - 70903


Additional Resources for:

Breather Bracket Hardware
Breather Bracket Hardware

Written by editor

January 8th, 2002 at 8:30 pm

Posted in Vintage Parts

Leave a Reply

Security Code: