lrhodes.com

Supreme Pondmaster Mag-Drive Utility Pumps - 250 and 700 GPH Pondmaster Pond Pumps - PETCO.comCentrifugal pump designed for the harsh conditions of pond use--ideal for waterfalls and larger statuary. The Mag-Drive Utility Pump is a magnetically driven centrifugal pond pump. It has no seals to wear out and contains no oil to contaminate the pond water. The utility pump can be used submerged or in-line. In-line means connections can be directly made to the pump inlet and outlet ports, which have 1/2" npt threads. This centrifugal pond pump cannot pull water up from a lower level. In order to start, the pump must be lower than water level. All electrical components are encapsulated in epoxy with no seals to wear or break. Energy used is approximately 1/2 of regular motor driven pumps of equal size. For convenience, both the pump head and the mounting base can be rotated to any of four different positions. Can be used in either salt or freshwater environments. One easy-clean reusable replacement filter included..

Supreme Mag-Drive Pond Utility Water Pump Magnetic drive utility pumps are made to run continuously, without seals to wear out. Highly energy efficient, the savings pass on to the consumer. Operates submerged or inline. Rsusable foam pre-filter. Includes 10' grounded power cord. Features: . Highly energy-efficient . Made to run continuously, without seals to wear out . Suitable for large aquariums, piped statuary and ponds Item Specifications: Model 2 - Max flow 250 GPH - Max flow height 7 ft - 21 watts Model 3 - Max flow 350 GPH - Max flow height 10.5 ft - 37 watts Model 5 - Max flow 500 GPH - Max flow height 10.5 ft - 60 watts Model 7 - Max flow 700 GPH - Max flow height 11.65 ft - 60 watts Model 9.5 - Max flwo 950 GPH - Max flow height 12.85 ft - 93 watts Model 12 - Max flow 1200 GPH - Max flow height 13.5 ft - 110 watts Model 18 - Max flow 1800 GPH - Max flow height 16.85 ft - 150 watts Model 24 - Max flwo 2400 GPH - Max flow height 18" - 265 watts

Demand Switch Model, Operates only when liquid flow is required - Pump and motor stop instantly when discharge is closed - Diaphragm: Santoprene - Check Valve: Viton - Inlet: 3/8 in Male Hose Barb - Outlet: 3/8 in Male Hose Barb - Includes On/Off switch - Max. fluid temperature: 110°F - Pump can run indefinitely without damage - Ball bearing drive, assures longer pump life - Excellent self priming capability - Permanent magnetic motor, long life brushes - Fuse protected - Built In cooling fan - Diaphragm design eliminates troublesome shaft seal - Replaces Fimco Model # 5275496, 5275086, 5273882, 5275015 and LF112301 - Roundup Ready

285753 - The regular motor coupling does not come with the metal bushing.

1 pair 6 1/2" mid bass speakers (200W rms/400W max)1-pair 1" neodymium dome tweeters (50W RMS/100W max)1-pair of passive crossover worksSystem frequency response: 50Hz-24kHzIncludes grilles and mounting hardware

Part of Pyle's Gear series, this component kit is designed to provide the best quality sound for the budget-minded. Includes one pair of 6.5-inch mid-bass speakers, one pair of 0.5-inch tweeters, one pair of passive crossover devices, a wiring kit, grills, and installation hardware--it's a perfect way to upgrade and expand the range of your factory system. Quality sound for the budget-minded. Click to enlarge. Passive crossover network with 12 dB/octave slope. Silk dome tweeters with neodymium magnets and multiple mounting options. 6.5-Inch Mid-Bass Speakers These mid-bass speakers pump out 400 watts of power, and with standard 6.5-inch sizing, will fit in most OEM locations. A brilliant yellow poly injection cone provides great rigidity and resistance to harsh weather conditions. A non-fatiguing butyl rubber surround and high-temperature aluminum voice coil mean you'll get years of performance without the wear and tear. The speakers are housed in electroplated steel baskets, and boast a 40-ounce magnet. 1/2-Inch Tweeters The included 100-watt 0.5-inch tweeters have three mounting options and a frequency response from 1.3 to 22 kHz. The neodymium magnet and silk dome construction help enable clear, well-defined high-end. Choose from flush, surface, or angle mounting to optimize your vehicle's mounting locations and get the best possible treble focus. Passive Crossover Networks Also included are a pair of passive crossover networks, with a 12 dB octave slope, to separate the signal from your head unit between the mid-bass and tweeter speakers for a richer, more accurate sound. Easy Installation A full wiring kit and all the installation hardware you'll need to add this system to your vehicle are included, along with a wiring diagram. About Pyle Audio Pyle Audio's legendary car audio products have acquired devoted fans worldwide. With the recent rapid developments in mobile video technology, Pyle has been on the forefront, making quality systems available at affordable prices. We have also expanded our product scope to include neon and LED lighting accessories, as well as vehicle security systems. Historically, Pyle Audio has been strictly a car audio manufacturer. This is no longer the case, thanks to our increasingly popular and successful Pyle Pro division. In just a few short years, Pyle Pro has come to be recognized as THE source for professional audio equipment at reasonable prices. We have proven that professional products and exorbitant pricing are not necessarily synonymous. PLG6C Specs Mid-Bass Size: 6.5 inches Magnet: 40 ounces Power handling: 200 watts RMS / 400 watts max. Impedance: 4 ohm Frequency response: 50 Hz to 5 KHz Mounting depth: 2.65 inches Tweeter Size: 0.5 inches Magnet: Neodymium Power handling: 50 watts RMS / 100 watts peak Frequency response: 1.3 to 22 KHz Impedance: 4 ohm Crossover Network Type: Passive Slope: 12 dB / Octave What's in the Box Pair of 6.5-inch mid-bass speakers, pair of 0.5-inch tweeters, pair of passive crossovers, grills, wiring kit, installation hardware, and wiring diagram template.

"QUICKSILVER" HIGH PERFORMANCE GEAR LUBE Engineered to provide maximum protection for stern drive and outboard lower units Exclusive formula is engineered to provide extended gear life in extreme conditions including high- speed and high horsepower applications Extensively tested to provide excellent protection against corrosion & excessive wear Specifically formulated to help prevent failures due to water entering the gear housing Extreme pressure synthetic additives protect gears from metal to metal contact Since no industry wide standards exist concerning marine gear oils, it is essential to use products such as mercury high performance gear lube which has been specifically designed and tested for marine applications 32 oz. bottl Bottle #1 selling marine lubricant company.